Ardex WPM 270

DOWNLOADS
Ardex WPM 270 SDS
Ardex WPM 270 PDS/TDS

Eco Systems Eco Prime WB - 5 Litre

A synthetic latex based primer for porous surfaces

Sika Eco Systems Eco Prime WB is a synthetic, latex based liquid, which is recommended for priming a range of porous substrates prior to the use of SikaFloor Self levelling compounds CTA adhesives and AQUABLOK / Sikatite water based waterproofing membranes. Sika® Eco Systems Eco Prime WB will reduce porosity of plasterboard, fibrous cement sheeting, cement render and porous susbstrates.

Sika Eco Systems Eco Prime WB is an easy to use pre-mixed water based primer that will reduce porosity of plasterboard, fibrous cement sheeting, cement render and porous concrete as well as various other porous substrates.

Features/Benefits:

DOWNLOADS
Eco Systems Eco Prime WB - 5 Litre PDS/TDS

Mapei Mapecoat I 600W /A - 2.3kg Drum

Mapecoat I 600 W is a two-component, transparent, epoxy resin-based primer according to a formula developed in the Mapei R&D Laboratories. Once Mapecoat I 600 W has been prepared as specified diluted according to requirements, it may be applied by roller or by airless spray in coats from 60 to 100 μm thick. Mapecoat to I 600 W may be applied directly on concrete without a vapour barrier. 

Features/Benefits:

• Epoxy-based primer
• Can be applied directly on concrete
• When applied before use of Mapecoat I 500w, this product can be used to form self-levelling, vapour-permeable coatings

DOWNLOADS
Mapei Mapecoat I 600W /A - 2.3kg Drum SDS
Mapei Mapecoat I 600W /A - 2.3kg Drum PDS/TDS

Mapei Mapecoat I 600W /B - 3.6kg Drum

Mapefloor I 600 W is a two-component, transparent, epoxy resin-based primer according to a formula developed in the Mapei R&D laboratories. Once Mapecoat I 600 W has been prepared as specified and diluted according to requirements, it may be applied by roller or by airless spray in coats from 60 to 100 μm thick. Mapecoat I 600 W may be applied directly on concrete without a vapour barrier. 

Features/Benefits:

• Epoxy-based primer
• Can be applied directly on concrete
• When applied before use of Mapecoat I 500w, this product can be used to form self-levelling, vapour-permeable coatings

DOWNLOADS
Mapei Mapecoat I 600W /B - 3.6kg Drum SDS
Mapei Mapecoat I 600W /B - 3.6kg Drum PDS/TDS

Mapei Planiseal MR/A - 10lt Bucket

Planiseal MR is an extremely versatile water based epoxy resin compound for use as a primer and protective coating to resist and prevent moisture transmission through mineral substrates. Suitable for applications directly over damp surfaces and freshly installed green concrete, screeds/ cementitious toppings. Planiseal MR exhibits excellent positive and negative hydrostatic pressure resistance. Once cured, subsequent waterproofing membranes, adhesives and other finish coats can be applied. 

Features/Benefits:

• Extremely versatile
• Suitable for application over damp surfaces, as well as green concrete, screeds and cementitious toppings
• Water-based

DOWNLOADS
Mapei Planiseal MR/A - 10lt Bucket SDS
Mapei Planiseal MR/A - 10lt Bucket PDS/TDS

RLA PrimerPU - 15L

RLA PrimerPU is a solvent based primer which has been designed for use with the Flex-Pro polyurethane range of sealants. The product is suitable for application on a number of surfaces, including concrete, brick and brickwork, as well as unglazed ceramic tiles. 

Features/Benefits:

• Easy application
• One-part - no mixing required, the product is ready to apply
• Resistance to a variety of weather conditions
• Usable on a wide number of surfaces, with perfect adhesion to minerals and concrete surfaces

DOWNLOADS
RLA PrimerPU - 15L SDS
RLA PrimerPU - 15L PDS/TDS

RLA UniPrime Porous Primer - 5L

RLA UniPrime is an acrylic primer designed for use prior to the installation of tile adhesives. The primer is designed to increase adhesion and reducing dehydration on porous surfaces, with no mixing of the product required prior to application.

Features/Benefits:

• Suitable for application on both walls and floors
• Increases adhesion and reduces dehydration on porous surfaces
• No mixing of the product required

DOWNLOADS
RLA UniPrime Porous Primer - 5L SDS
RLA UniPrime Porous Primer - 5L PDS/TDS

RLA Gripset E60 Two Part Epoxy Primer - 20L Kit

RLA Gripset E60 Two Part is a water based epoxy, designed for use as both a primer and a protective coating to stop moisture penetration.

RLA Universal Primer - 5L

RLA Universal Primer is a rapid-drying, solvent free, water based primer, designed for use on both porous and non-porous surfaces, as well as surfaces painted with water-based, paint, and both sealed and burnished concrete floors. It is compatible with both ceramic tile adhesives and levelling compounds.

Features/Benefits:

• Solvent-free, water-based primer with a low VOC
• Suitable for application on both porous and non-porous surfaces
• Compatible with ceramic tile adhesives and levelling compounds

DOWNLOADS
RLA Universal Primer - 5L SDS
RLA Universal Primer - 5L PDS/TDS

Sikafloor 01 Primer

Synthetic resin primer, applied prior to flooring & tiling systems

Sikafloor 01 Primer is a solvent-free, concentrated resin primer designed to be applied prior to cement & gypsum type products. It enhances bond strength between the substrate and subsequently applied Sika materials. The product has a low VOC, and is suitable for both internal and external applications in a number of environments, including commercial and industrial installations. 

Features/Benefits:

DOWNLOADS
Sikafloor 01 Primer SDS
Sikafloor 01 Primer PDS/TDS

SikaTite Moisture Seal

DOWNLOADS
SikaTite Moisture Seal PDS/TDS

SikaTile 015 NPP - 1 Litre

SikaTile 015 NPP is a water-based and non-porous speciality primer with advanced adhesion properties, designed for use on existing tiles, on smooth, non-porous, and generally difficult to adhere substrates prior to ceramic, tile, porcelain and other stone application. It does not require mechanical surface preparation, and can also adhere to PVC pipe penetrations, as well as puddle flanges and metal floor drains, and is suitable for both internal and external applications. 

Features/Benefits

• Flexible, water-based, nonporous primer
• Bond enhancing properties on existing tiles, smooth and non-porous surfaces
• Suitable for internal and external applications, with low VOC
• Fast-drying, suitable for installation of tiles 1 hour after application
• Ready to use, with no mixing required, 

DOWNLOADS
SikaTile 015 NPP - 1 Litre SDS
SikaTile 015 NPP - 1 Litre PDS/TDS

SikaTile 015 NPP - 4 Litre

SikaTile 015 NPP is a water-based and non-porous speciality primer with advanced adhesion properties, designed for use on existing tiles, on smooth, non-porous, and generally difficult to adhere substrates prior to ceramic, tile, porcelain and other stone application. It does not require mechanical surface preparation, and can also adhere to PVC pipe penetrations, as well as puddle flanges and metal floor drains, and is suitable for both internal and external applications. 

Features/Benefits

• Flexible, water-based, nonporous primer
• Bond enhancing properties on existing tiles, smooth and non-porous surfaces
• Suitable for internal and external applications, with low VOC
• Fast-drying, suitable for installation of tiles 1 hour after application
• Ready to use, with no mixing required, 

DOWNLOADS
SikaTile 015 NPP - 4 Litre SDS
SikaTile 015 NPP - 4 Litre PDS/TDS

Sikatile 015 NPP - 10L

SikaTile 015 NPP is a water-based and non-porous speciality primer with advanced adhesion properties, designed for use on existing tiles, on smooth, non-porous, and generally difficult to adhere substrates prior to ceramic, tile, porcelain and other stone application. It does not require mechanical surface preparation, and can also adhere to PVC pipe penetrations, as well as puddle flanges and metal floor drains, and is suitable for both internal and external applications. 

Features/Benefits

• Flexible, water-based, nonporous primer
• Bond enhancing properties on existing tiles, smooth and non-porous surfaces
• Suitable for internal and external applications, with low VOC
• Fast-drying, suitable for installation of tiles 1 hour after application
• Ready to use, with no mixing required, 

Bostik Ultra Multiprime A530 - 20L

Bostik Ultra Multiprime A530 is a general purpose primer designed for use on porous surfaces. It is suitable for both internal and external applications, on both floors and walls, and can be applied for priming before tiling or waterproofing. 

Features/Benefits:

• Can be applied over a number of substrates, including concrete, render, fibre cement and plasterboard
• Can be covered with tile adhesive, waterproofing membranes or general cement-based systems
• Improves bond and helps improve consistency of surface

DOWNLOADS
Bostik Ultra Multiprime A530 - 20L SDS
Bostik Ultra Multiprime A530 - 20L PDS/TDS

Bostik UL Primer - 5L

Bostik UL Primer is a high-performance, one-component primer designed for the use over porous substrates, and with Bostik's Floor Levelling range. It has a polymer modified formula, and it's fast drying and rapid tack capabilities allow for early application of levelling compound. 

Features/Benefits:

• Easily diluted and economical, with a high coverage rate
• High bond strength, and will not re-emulsify when dry
• Designed for use with Bostik's floor levelling range

DOWNLOADS
Bostik UL Primer - 5L SDS
Bostik UL Primer - 5L PDS/TDS

Bostik Prime Grip - 7kg

Bostik Prime Grip is a one part, solvent free primer designed to provide high adhesion to various non-porous substrates. It is designed for both commercial and residential application, is odourless, and can be applied with either brush or roller.

Features/Benefits:

• Odourless, making it suitable for use in all types of location
• Can be used for both non-porous and porous substrates
• Can be used with existing tiles, old and crunchy vinyl, and over residues ofd old acrylic or alcohol adhesives
•  

DOWNLOADS
Bostik Prime Grip - 7kg SDS
Bostik Prime Grip - 7kg PDS/TDS

Kerakoll Active Prime Fix - 5kg

Kerakoll Active Prime Fix is a rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders. It develops total compatibility with absorbent and non-absorbent substrates, guaranteeing maximum adhesion when overlaying with cement-, gypsum- and mortar-based mineral products. 

Features/Benefits:

• Extremely fluid, high stabilising and impregnating power
• Rapid drying, ideal for the surface consolidating treatment of dry, dusty substrates
• Suitable for both internal and external applications

DOWNLOADS
Kerakoll Active Prime Fix - 5kg PDS/TDS

Ardex P9 - 4L

Ardex P9 is a water-based, solvent free single part primer designed to improve adhesion to smooth, dense and non-porous substrate. It is easy to apply with a brush or roller, with the application of subsequent products requiring minimal downtime. 

Features/Benefits:

• Suitable for internal and external applications, alongside wall and floor applications
• Can be used over a wide range of substrates
• Low VOC

DOWNLOADS
Ardex P9 - 4L SDS
Ardex P9 - 4L PDS/TDS
Ardex P9 - 4L VOC