ACS Traditional Floor Screed - 20kg

ACS Traditional Floor Screed is a pre-blended screed mixture for the installation of cementitious screeds and beds. It is comprised of specially graded sand, cement and additives, and is specifically formulated to create easily used and applied cementitious screeds. It is suitable for internal and external floor applications, and for the installation of tiles, vinyl and carpet. 

Features/Benefits:

• Single component system, requiring only the addition of clean water
• Suitable for internal and external flooring applications
• Can be used in thin and thick bed applications
• Suitable for the installation of tiles, vinyl and carpet

DOWNLOADS
ACS Traditional Floor Screed - 20kg SDS
ACS Traditional Floor Screed - 20kg PDS/TDS

DTA Champagne Seamless Transition Cover - 37mm

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Black Edge Cover - 5.5mm x 3.3m

DTA Matt Black Edge Cover - 6.5mm x 3.3m

Ardex WPM 822

ARDEX WPM 822 is a tough, fast curing, aliphatic polyurethane coating designed as a trafficable, impact resistant finish providing a long life protective barrier for both internal and exposed situations. ARDEX WPM 822 as a top coat is UV resistant and provides a durable, non-slip, chemically resistant finish

DOWNLOADS
Ardex WPM 822 SDS
Ardex WPM 822 PDS/TDS

DTA Matt Black Edge Cover - 8mm x 3.3m

DTA Matt Black Edge Cover - 13mm x 3.3m

DTA Matt Black Edge Cover - 15mm x 3.3m

DTA Matt Black L Shape End Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4

DTA Matt Bronze Edge Cover - 5.5mm x 3.3m

DTA Matt Bronze Edge Cover - 6.5mm x 3.3m

DTA Matt Bronze Edge Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Bronze End Cover - 13mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Bronze Edge Cover - 15mm x 3.3m

DTA Matt Bronze End Cover - 5mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Bronze L Shape End Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

Roberts 101 Skirting Contact

Roberts 101 Skirting Contact Adhesive is a solvent based cement with rapid drying properties, a high strength profile, as well as a high heat resistance, and excellent ageing. It is designed for use in a number of applications, including:

• Vinyl and plastic skirtings
• Cover strips
• Plastic and metal treads
• Nosings

Features/Benefits:

• Rapid drying, with high strength, excellent ageing and great heat resistance
• Designed for use on a variety of materials
• Great for internal applications

DOWNLOADS
Roberts 101 Skirting Contact SDS
Roberts 101 Skirting Contact PDS/TDS

Roberts Smoothedge Domestic Gripper Wood Nails

Roberts Domestic Smoothedge Carpet Gripper with Wood Nails is a timber edging strip designed to be used as a timber edging strip to hold stretched carpet on wood substrates. This allows the product to provide a smooth edge for your carpeting applications. 

Features/Benefits:

• Pre-nailed, making installation both quicker and easier
• Gives a smooth edge for perimeter of carpeting installations
• Perfect for use on wood substrates

Roberts Smoothedge Domestic Gripper Concrete Nails

Roberts Domestic Smoothedge Carpet Gripper with Concrete Nails is a timber edging strip designed to be used as a timber edging strip to hold stretched carpet on concrete substrates. This allows the product to provide a smooth edge for your carpeting applications. 

Features/Benefits:

• Pre-nailed, making installation both quicker and easier
• Gives a smooth edge for perimeter of carpeting installations
• Perfect for use on concrete substrates

Roberts Hammer Stapler

Roberts A11 8mm Staples x 5000

Roberts 8mm A11 Staples are designed for use in applying carpet and floating floor underlays to timber floors. They are easily applied to timber.

Features/Benefits:

• Easily applied to timber
• Great holding power
• Sturdy storage in plastic box

Knee Kicker Extra Wide Head

Capitol Grip Stick - 500ml

Capitol Grip Stick is a fast setting carpet gripper. It is ideal for bonding, having excellent resistance to high temperatures and water. It is available in liquid form for ease of application, and the 500ml bottle with the applicator tip makes it easy to handle. 

DOWNLOADS
Capitol Grip Stick - 500ml SDS

Roberts Carpet Tucker with Three Wheels

Roberts Set of Three Wheels for 10-1088 Carpet Tucker

DTA Matt Champagne Edge Cover - 5.5mm x 3.3m

DTA Matt Champagne Edge Cover - 6.5mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Champagne Edge Cover - 8mm x 3.3m

DTA Matt Champagne Edge Cover - 13mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Champagne Edge Cover - 15mm x 3.3m

DTA Matt Champagne L Shape End Cover - 5mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Champagne L Shape End Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Silver End Cover - 6.5mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Silver Edge Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Silver End Cover - 13mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Silver Edge Cover - 3.3m x 15mm

DTA Matt Silver L-Shape End Cover - 5mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

DTA Matt Silver L Shape End Cover - 8mm x 3.3m

Designed to provide protection to raw laminate/floating floor edges giving a professional clean finish, this edge cover can be retrofitted after installation of flooring, and has been tested to slip resistance AS 4586:2013 with a slip-resistance rating of P4. 

RLA TruLevel EconoScreed Rapid - 20kg

RLA TruLevel EconoScreed is a polymer enhanced flooring screed, designed to allow use in areas exposed to consistent moisture.

DOWNLOADS
RLA TruLevel EconoScreed Rapid - 20kg SDS
RLA TruLevel EconoScreed Rapid - 20kg PDS/TDS

Roberts Edge Cap - Beige

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts Edge Cap - Black

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts 6150 Sprayable Contact Adhesive - 20 Litre

Roberts 6150 is a sprayable contact adhesive, specially formulated for the bonding of CP and flexible polyurethane foams with a long open time. It has both high strength and heat resistant properties, yet also allows the dry film to remain soft and flexible. 

Features/Benefits:

• Excellent bond strength and high heat resistance
• High solids content gives it great economy of use
• Easy application by spraying to bond to a wide range of materials

DOWNLOADS
Roberts 6150 Sprayable Contact Adhesive - 20 Litre SDS
Roberts 6150 Sprayable Contact Adhesive - 20 Litre PDS/TDS

Roberts Shark Teeth - 3 Pack

Roberts Smoothedge Gripper with Concrete Nails - 33mm

Roberts Domestic Smoothedge Carpet Gripper with Concrete Nails is a timber edging strip designed to be used as a timber edging strip to hold stretched carpet on concrete substrates. This allows the product to provide a smooth edge for your carpeting applications. 

Features/Benefits:

• Pre-nailed, making installation both quicker and easier
• Gives a smooth edge for perimeter of carpeting installations
• Perfect for use on concrete substrates

Roberts Edge Cap - Dark Grey

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts Edge Cap - Grey

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts Edge Cap - Mid-Brown

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts Edge Cap - Mocha

Roberts Edge Cap is an extrusion designed for use on the transition between carpeting and other flooring. 

Roberts Heat Bond Tape - Economy Release

This Heat Bond Tape is made for seaming carpets, designed to work with both woven and tufted carpets.

Features/Benefits:

• Designed for use on seaming carpets
• Made to work with both woven and tufted types of carpet

Roberts Super GT Heat Bond Tape - 100 Metres

This Heat Bond Tape is made to provide the maximum seam strength in a large number of domestic carpet installations, including jute and polypropylene backed carpets. It is designed for both low smoke and odour output emissions, making it suitable for occupied environments. 

Features/Benefits:

• Low smoke and low odour, making it perfect for occupied environments
• Maximises seam strength in domestic carpet installations
• Suitable for a number of domestic installations, including jute and polypropylene backed carpets

Sika MonoTop 612N

Polymer modified high strength high build concrete repair mortar

Sika MonoTop-612 N is a cement-based, one component low permeability concrete repair mortar, containing silica fume and polymer, meeting the requirements of Class R4 of EN 1504-3.

DOWNLOADS
Sika MonoTop 612N SDS
Sika MonoTop 612N PDS/TDS

Sikafloor 050 Ramp & Patch

Sikafloor 050 Ramp and Patch is a fast-setting ramping/patching mortar used for concrete surfaces. It's rapid drying, with very low VOC, and is suitable for internal and external applications. It can be applied by itself, or as part of a system with suitable materials, to create a smooth transition between two types of flooring, as well as patching damaged concrete floors, stairs and walls. 

Features/Benefits:

• Suitable for internal and external applications
• Very low VOC and non-combustible
• Rapid drying and fast setting
• Smooth flat surface is achievable

DOWNLOADS
Sikafloor 050 Ramp & Patch SDS
Sikafloor 050 Ramp & Patch PDS/TDS

Roberts Smoothedge 33m Gripper with Wood Nails - 33mm

Roberts Domestic Smoothedge Carpet Gripper with Wood Nails is a timber edging strip designed to be used as a timber edging strip to hold stretched carpet on wood substrates. This allows the product to provide a smooth edge for your carpeting applications. 

Features/Benefits:

• Pre-nailed, making installation both quicker and easier
• Gives a smooth edge for perimeter of carpeting installations
• Perfect for use on wood substrates

Sikafloor Level TOP - 20kg Bag

Sikafloor TOP is a self-levelling compound, which is high flowing, used on concrete substrates prior to flooring installation. It has very low VOC, is non-combustible, and has a good pot-life and working time.

Features/Benefits:

• Non-combustible, with very low VOC
• Designed for large floor applications
• Highly fluid
• Good pot-life and working time
• Simply mix and apply - no slaking or re-mixing required

DOWNLOADS
Sikafloor Level TOP - 20kg Bag SDS
Sikafloor Level TOP - 20kg Bag PDS/TDS
Sikafloor Level TOP - 20kg Bag VOC

Roberts Sterling Concave Blades - 10 Pack

10 Sterling Concave Blades designed for use on vinyl surfaces. 

Roberts Sterling Hook Blades - 10 Pack

Roberts Sterling Trimmer Blades - 10 Pack

10 sterling trimmer blades designed to allow carpet cutting with ease. 

Sikafloor Level Ultra - 20kg Bag

Sikafloor Level Ultra is a Fiber Reinforced Self Levelling Compound that can be applied on interior or exterior concrete substrates. 

It can be applied in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite, and Davco Ranges. 

Features/Benefits:

• High flexural and compressive strength
• Suitable for the application of tiles after 7-8 hours
• Simply mix and apply - no slaking or re-mixing required
• Suitable for use with underfloor heating

DOWNLOADS
Sikafloor Level Ultra - 20kg Bag SDS
Sikafloor Level Ultra - 20kg Bag PDS/TDS

Sika Sikafloor Level-30

High performance industrial self-levelling compound

Sikafloor Level-30 is a high performance polymer modified self-levelling compound for interior and exterior applications. It is suitable for both internal and external applications, is self-smoothing, and has high compressive and flexural strength.

Features/Benefits:

• Fast drying, non-combustible and self-smoothing
• Very high compressive, flexural and surface-abrasive strength
• Controlled thermal expansion and contraction, with a good workability and pot-life

DOWNLOADS
Sika Sikafloor Level-30 SDS
Sika Sikafloor Level-30 PDS/TDS

Capitol Carpet Adhesive - 15 Litre

Capitol Carpet Adhesive is designed for bonding a large number of carpets and underlays, including both jute and polypropylene backed carpets in direct stick and double bond installations. It is low VOC, water based and a prolonged re-bond time. It is suitable for only internal use.

Features/Benefits:

• Suitable for internal use
• Water based, with low VOC emissions
• Designed for use with a wide range of carpets and underlays

DOWNLOADS
Capitol Carpet Adhesive - 15 Litre SDS
Capitol Carpet Adhesive - 15 Litre PDS/TDS
Capitol Carpet Adhesive - 15 Litre VOC

Capitol Pressure Sensitive Adhesive - 15 Litre

Capitol Pressure Sensitive Adhesive is a solvent-free, pressure sensitive adhesive designed for the installation of a number of different carpet tiles, including those with PVC, fibre and cushion backing, as well as reinforced vinyl composition tiles. It is installer friendly, with a low odour and VOC emission, and can be applied to concrete substrates with moisture contents up to 85% relative humidity.

Features/Benefits:

• Low odour and VOC emissions
• Suitable for the installation of a number of different carpet tiles
• Can be applied to concrete substrates with up to 85% humidity

DOWNLOADS
Capitol Pressure Sensitive Adhesive - 15 Litre SDS
Capitol Pressure Sensitive Adhesive - 15 Litre PDS/TDS

Capitol Feather C610 - 10kg

Capitol Feather C610 is a cement based, rapid drying, smoothing and skim coat designed for various internal substrates, including dry concrete, in order to provide a smooth finish prior to receiving a number of floor coverings, including vinyl, carpet and ceramic tile. It can be applied from feather edge to 3mm in one application, and the rapid drying performance allows the installation of most floor coverings in as little as 30 minutes.

Features/Benefits:

• Suitable for installation prior to a number of floor coverings, including vinyl, carpet and ceramic tiles
• Can be applied as little as 30 minutes prior to floor coverings
• Suitable for internal use

DOWNLOADS
Capitol Feather C610 - 10kg SDS
Capitol Feather C610 - 10kg PDS/TDS
Capitol Feather C610 - 10kg VOC

Capitol Hard Set Vinyl Adhesive - 15 Litre

Capitol Hard Set Vinyl Adhesive is a hard set adhesive with a good balance between open and work time. It is suitable for the installation of a number of dimensional, stable, PVC floorings, including LVP, LVT, as well as sanded back sheet rubber flooring up to 4mm thick, and is suitable for bonding textile floor coverings with all common backings. It is suitable for indoor usage only, and can be used in wet mode for LVP, or semi-wet mode for sheet vinyl floor coverings. 

DOWNLOADS
Capitol Hard Set Vinyl Adhesive - 15 Litre SDS
Capitol Hard Set Vinyl Adhesive - 15 Litre PDS/TDS
Capitol Hard Set Vinyl Adhesive - 15 Litre VOC

Roberts R2000 Flooring Adhesive - 15 Litre

Roberts R2000 is an acrylic, co-polymer, hard set adhesive with strong tack qualities. It has great plasticiser resistance, and non-staining properties, and has a strong bond for a range of PVC vinyl and textile floor coverings. It is designed for interior usage, and is designed to be protected against biodegradation, while withstanding everyday wet cleaning practices. 

Features/Benefits:

• Excellent coverage, installer friendly
• Solvent free, low odour, anti-microbial formulation
• Strong initial tack with building green credits
• Green star compliant

DOWNLOADS
Roberts R2000 Flooring Adhesive - 15 Litre SDS
Roberts R2000 Flooring Adhesive - 15 Litre PDS/TDS

Bostik Ultraset SF - 16kg Bucket

Bostik Ultraset SF is a timber adhesive which is recommended by the major timber manufacturers. It is non flammable, easy to spread, and requires no mixing to use. With it's excellent bond strength and acoustic properties, it is suitable for use in adhering a large number of wood floorings, including softwood, hardwood, engineered flooring, and is recommended as an intermediate layer between subfloor and flooring systems.

Features/Benefits:

• No mixing, and will not re-emulsify when in contact to water
• Excellent bond strength and acoustic properties, whilst remaining flexible after full cure
• Suitable over radiant heating

DOWNLOADS
Bostik Ultraset SF - 16kg Bucket PDS/TDS

Bostik Ultra Level Plus C700 - 20kg

Bostik Ultra Level Plus C700 is a high flow, cement-based, self-levelling compound designed to achieve maximum flow without any shrinkage or cracking. It is single component, with fast application, and can be applied directly onto prepared concrete surface. 

Features/Benefits:

• Suitable for internal uses, including underlayment for commercial and domestic vinyl, carpets, and timber/laminates
• Carpet or tile may be applied after 24 hours
• Good pot life and working time

DOWNLOADS
Bostik Ultra Level Plus C700 - 20kg SDS
Bostik Ultra Level Plus C700 - 20kg PDS/TDS

Bostik Ultraset 2-in-1 - 16kg

Bostik Ultraset 2 in 1 is an advanced, tri-linking adhesive and moisture control membrane. It has superior bond strength, with extremely low moisture vapour permeability, and no restriction on board length or width. It is suitable for use over a wide range of substrates, including concrete, terrazzo, ceramic tiles and timber. 

Features/Benefits:

• Anti-fracture performance, with zero VOC content
• Suitable over radiant heating
• Adheres parquet, cork and solid strip softwood, amongst other materials

DOWNLOADS
Bostik Ultraset 2-in-1 - 16kg SDS
Bostik Ultraset 2-in-1 - 16kg PDS/TDS

Bostik Ultraset 3-in-1 - 16kg

Bostik Ultraset 3-in-1 is an advanced tri-linking, adhesive, moisture control and sound reduction membrane. It has extremely low moisture vapour permeability, with zero VOC. It has anti-fracture technology, and it's moisture vapour permeability means that concrete moisture testing is not required when the slab is prepared, cured and dry to touch. 

Features/Benefits:

• Suitable over radiant heating
• Thickness control spacer maintains the adhesive thickness between hardwood flooring and substrate
• Superior sound control typically outperforms 3mm rubber underlay

DOWNLOADS
Bostik Ultraset 3-in-1 - 16kg SDS
Bostik Ultraset 3-in-1 - 16kg PDS/TDS

Bostik Ultraset SF - 600ml Sausage

Bostik Ultraset SF is a solvent-free, polyurethane timber flooring adhesive. It's non-flammable, ready to use and easy to spread, and is the recommended adhesive by major timber manufacturers. It is suitable for use with a number of flooring types, including solid strip softwood and hardwood, as well as engineered and bamboo flooring.

Features/Benefits:

• Solvent-free formulation, with zero VOC
• Retains flexibility after full cure, with excellent bond strength and acoustic properties
• Easy to use, with no mixing required

Ardex Concrete Crack Lock Carbon Fibre Bridging Stitch

The Ardex Concrete Crack Lock is a revolutionary product developed for the improvement of crack repairs. It is installed by making single blade width cuts across cracks, and drilling holes along the cut at appropriate locations. It permanently bonds both sides of the crack together, and it has been engineered to stop cracks in concrete slabs, poured walls, and masonry, amongst other materials.

Features/Benefits:

• High strength, non corrosive and alkali resistant
• Revolutionary product designed to improve crack repair
• Engineered to stop cracks in a wide range of slabs, and cracks of various sizes

Capitol Vinyl Adhesive - 15kg

Capitol Vinyl Adhesive is a water-based multipurpose adhesive for the installation of both dimensional stable PVC flooring as well as bonding textile floor coverings with all common balance. It can be used in both wed mode for LVP, or semi-wet mode for sheet vinyl floor coverings. 

Features/Benefits:

• Suitable for indoor usage
• Good all round balance between work time and open time

DOWNLOADS
Capitol Vinyl Adhesive - 15kg SDS
Capitol Vinyl Adhesive - 15kg PDS/TDS

Kerakoll SLE 500 - 20kg

Kerakoll SKE 500 Fix is a certified, extra-rapid hardening, eco-friendly, self-levelling mineral product for the high-performance, smooth finishing of irregular substrates. It has very low VOC emissions, and rapidly develops a smooth finish and perfectly even surface with high levels of mechanical resistance.

Features/Benefits:

• Suitable for both internal and external use
• Long self-levelling time and extra-rapid hardening
• Suitable for laying ceramic and porcelain tiles, natural stone, hardwood floors and resilient materials using adhesives

DOWNLOADS
Kerakoll SLE 500 - 20kg SDS

Ardex AF171 - 15L

Ardex AF 171 is a fast grab, universal, water based vinyl adhesive with excellent dimensional stability, a very strong ultimate bond, and excellent resistance to plasticiser migration. It is suitable for a wide range of application and the permanent installation of a number of a number of formats, including vinyl plank, sheet and wall sheet vinyl, as well as linoleum and direct stick and double bond carpet. 

Features/Benefits:

• Low VOC
• Suitable for permanent internal applications
• Can be used alongside a range of other Ardex products

DOWNLOADS
Ardex AF171 - 15L SDS
Ardex AF171 - 15L PDS/TDS

Ardex AF180 - 12kg

Ardex AF 180 is a one-component, heavy duty, MS polymer adhesive for resilient floor coverings, VCT and LVT. It is moisture, weather and water resistance, and has high temperature resistance, making it suitable for both internal and external use, including in areas of direct sunlight.

Features/Benefits:

• Very high bond strength
• Solvent free, with very low emissions
• Protected from biodegradation, and has good resistance to plasticiser migration

DOWNLOADS
Ardex AF180 - 12kg SDS
Ardex AF180 - 12kg PDS/TDS
Ardex AF180 - 12kg VOC

Ardex K65 - 20kg

Ardex K65 is a single part leveller with direct stick timber applications and rapid hardening, making it walkable in just 2 hours. It is fibre reinforced and MICROTEC technology, allowing it to rapidly slow and level new and existing substrates applying a floor finish. It is suitable with a wide range of substrates, and a range of suitable coverings, such as carpet, vinyl, LVT and floating floors. 

Features/Benefits:

• Suitable over a wide range of substrates, including new and existing strip timber
• Suitable for internal applications
• Can be walked over after approximately 2 hours

DOWNLOADS
Ardex K65 - 20kg SDS
Ardex K65 - 20kg PDS/TDS

Ardex K301 - 20kg

Ardex K301 is a versatile, quick drying exterior levelling and smoothing compound. It is quick drying and easy to install, with 2mm to 20mm able to be applied in one application. It can be applied in a wide range of environments, including in workshops and domestic garages, as well as courtyards and footpaths.

Features/Benefits:

• Suitable for both interior and exterior applications
• Can be hand mixed or pump applied
• Can be applied in a wide range of environments

DOWNLOADS
Ardex K301 - 20kg SDS
Ardex K301 - 20kg PDS/TDS
Ardex K301 - 20kg VOC

Ardex RA 56 - 254ml

Ardex RA 56 is a low viscosity rigid hybrid polyurethane crack and spall repair. It's rapid cure, able to be trafficked within 20 minutes, and ideal for spall repair when mixsed with aggregate. 

Features/Benefits:

• Rapid curing with minimal downtime
• Ready for grinding and open to traffic in less than 1 hour
• Can be mixed with dry, bagged aggregate

DOWNLOADS
Ardex RA 56 - 254ml SDS
Ardex RA 56 - 254ml PDS/TDS
Ardex RA 56 - 254ml VOC