Waterproofing
Ardex WPM 002
ARDEX WPM 002 (Superflex Bathroom and Balcony Two Part) is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. The product has been uniquely formulated with synthetic microfibres to increase its strength and eliminate the need for a separate reinforcement mat. ARDEX WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification.
Features/Benefits:
-
Fast drying ARDEX WPM 002 can be tiled over in 16–24 hours, or 4 hours @ 23°C / 50% RH in non critical areas*.
-
Fibre reinforced and flexible
-
Resistant to re-emulsification
-
Water based, low odour and easy cleaning
DOWNLOADS
Ardex WPM 002 SDS
Ardex WPM 002 PDS/TDS
Ardex WPM 002 VOC
Ardex WPM 114
Ardex WPM 114 is an APP (Atactic Polypropylene) plastomeric type modified bitumen membrane vented base sheet, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high-grade viscoelastic polymers. Ardex WPM 114 is suitable for application in all climatic zones, with excellent cold flexibility enabling an easy application and this also means the membrane is ideally suited for application in harsh climates. The exceptional elongation properties of APP, combined with the strength and dimensional stability of the reinforcing, provides an excellent waterproofing membrane in roofing applications. Ardex WPM 114 is coated with a sanded polymeric film PE/PP, while the bottom surface has thermo-adhesive strips that activate with heat.
Features/Benefits:
- Self-Adhesive for fast-tracked installation
- High flexibility during application at sub-zero with no physical strains, with high malleability
- Accommodates structural movements
- Resistant to chemical attacks and withstands thermal shocks
- Proven performance in colder regions
- Excellent elongation and flexibility
DOWNLOADS
Ardex WPM 114 SDS
Ardex WPM 114 PDS/TDS
Ardex WPM 130 Builder's Express
Ardex WPM 130 Builder's Express is an acrylic PU water-based waterproofing membrane developed for high performance undertile waterproofing.
Features/Benefits:
- Tough, flexible, firm
- Can be tiled over - good adhesion with Ardex tile adhesives
- Excellent adhesion to a wide range of substrates
- Fast drying, 4 hours on decks and some applications
- Meets Green Building Council of Australia Greenstar requirements IEQ-13, IEQ-11
DOWNLOADS
Ardex WPM 130 Builder's Express SDS
Ardex WPM 130 Builder's Express PDS/TDS
Ardex WPM 150
Ardex WPM 150 (Shelterbit 3/160) is an A.P.P (Atactic Polypropylene) Plastomeric type modified bitumen membrane, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high grade visco-elastic polymers and reinforced with a polyester reinforcement. Ardex WPM 150 is coated with either a sanded or talc top surface finish, while the bottom surface is embossed and protected by a heat sensitive polythene film.
Features/Benefits:
- Excellent cold flexibility to –5 ÌŠC, with excellent elongation
- Heat welded laps provide homogenous joint
- Good elastic memory, high mechanical characteristics and puncture resistance
- Good elongation
- Will not decay
DOWNLOADS
Ardex WPM 150 SDS
Ardex WPM 150 PDS/TDS
Ardex WPM 155 Rapid
Ardex WPM 155 Rapid is a water based, polyurethane-acrylic waterproofing membrane developed for high-performance under-tile waterproofing. It is a fast drying membrane, with excellent film build, making it easy to gauge thickness. It is a Class III membrane, accordance with AS4858 requirements, and meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools.
Features/Benefits:
- Extended coverage for minimising cost
- Fast drying, with excellent adhesion to a wide range of substrates
- Can be tiled over
- Long shelf life
DOWNLOADS
Ardex WPM 155 Rapid SDS
Ardex WPM 155 Rapid PDS/TDS
Ardex WPM 155 Rapid VOC
Ardex WPM 179
ARDEX WPM 179 is a one component liquid applied, latex modified, bituminous elastomeric waterproofing membrane. When cured it forms a permanently flexible waterproof lining to most building surfaces. ARDEX WPM 179 is predominately used as a patching or repair membrane. ARDEX WPM 179 is water based, has almost no odour and is safe to use.
Benefits/Features:
- Easily applied with excellent adhesion to substrates
- High elongation and retains flexibility at low temperatures
- Resists ponding water (once fully cured)
- Water based, with excellent chemical resistance properties
DOWNLOADS
Ardex WPM 179 SDS
Ardex WPM 179 PDS/TDS
Ardex WPM 179 VOC
Ardex WPM 185
Ardex WPM 185 is an A.P.P (Atactic Polypropylene) Plastomeric type modified bitumen membrane, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high grade viscoelastic polymers and reinforced with a combined reinforcement (Polyester and Fibreglass). The product is coated with a slate mineral granule topping, while the bottom surface is embossed and protected by a heat sensitive film.
Features/Benefits:
- Positive vapour barrier and excellent resistance to atmospheric agents
- Resistant to chemical attacks, excellent elongation and high puncture resistant
- Withstand thermal shocks
- Heat welded laps to provide homogenous joints
DOWNLOADS
Ardex WPM 185 SDS
Ardex WPM 185 PDS/TDS
Ardex WPM 185 Grey - 8m x 1m x 4m Roll
Ardex WPM 185 is an A.P.P (Atactic Polypropylene) Plastomeric type modified bitumen membrane, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high grade viscoelastic polymers and reinforced with a combined reinforcement (Polyester and Fibreglass). The product is coated with a slate mineral granule topping, while the bottom surface is embossed and protected by a heat sensitive film.
Features/Benefits:
- Positive vapour barrier and excellent resistance to atmospheric agents
- Resistant to chemical attacks, excellent elongation and high puncture resistant
- Withstand thermal shocks
- Heat welded laps to provide homogenous joints
DOWNLOADS
Ardex WPM 185 Grey - 8m x 1m x 4m Roll SDS
Ardex WPM 185 Grey - 8m x 1m x 4m Roll PDS/TDS
Ardex WPM 240
Ardex WPM 240 is a solvent based primer to be used to seal and prepare the substrate prior to the installation to the Shelterbit torch-on and Shelterseal self adhesive membranes. The product is fast curing, and can be applied using a number of techniques, including by brush or airless spray.
Features/Benefits:
- Fast curing
- Solvent-based
- Designed for use with other Ardex Bitumen Systems
- Number of application options - can use roller, brush or airless spray
DOWNLOADS
Ardex WPM 240 SDS
Ardex WPM 240 PDS/TDS
Ardex WPM 265
Ardex WPM 265 is a red pigmented, acrylic primer system which creates a positive bond between between the substrate and most ARDEX water based membranes. ARDEX WPM 265 can be used in both internal and external applications.
Features/Benefits:
- Suitable for both internal and external applications
- Can be applied on a number of substrates, including timber, as well as new and old concrete
- Suitable for use with a range of Ardex products
DOWNLOADS
Ardex WPM 265 SDS
Ardex WPM 265 PDS/TDS
Ardex WPM 265 VOC
Ardex WPM 300
ARDEX WPM 300 (HydrEpoxy 300) is a two component water based epoxy polyamide membrane/barrier coating. Approved for use with potable (drinking) water.
Features/Benefits:
- Approved for use with potable (drinking) water
- Non-flammable and negligible odour.
- Excellent adhesion to most substrates including brick, masonry, and timber
- Easy clean-up using water.
DOWNLOADS
Ardex WPM 300 SDS
Ardex WPM 300 PDS/TDS
Ardex WPM 300 VOC
Ardex WPM 310 White Base - 15L
Ardex WPM 310 is a tough, UV Stable, and flexible liquid applied waterproofing coat. It has been specifically formulated as a general purpose for exposed facade applications. Ardex WPM 310 can be applied as an aesthetically attractive textured or semi-smooth finish.
Features/Benefits:
- Safe to use, low odour, and easy cleaning
- Provides excellent UV resistance and long-term protection from elements
- Excellent workability
- Can be tinted to a wide range of colours
DOWNLOADS
Ardex WPM 310 White Base - 15L SDS
Ardex WPM 310 White Base - 15L PDS/TDS
Ardex WPM 310 White Base - 15L VOC
Ardex WPM 330 (Facade) - 15 Litre Pail
Ardex WPM 330 is an extremely weather resistant, water-based acrylic waterproofing coating. Specially designed as an exposed facade coating, Ardex WPM 330 prevents moisture, chloride ion, and carbon dioxide entering and damaging the building structure while still allowing the substrate to breathe.
Features/Benefits:
- Water-based, low odour and easy cleaning
- Highly flexible and durable
- Prevents chloride ion, sulfide ion, and carbon dioxide attack
- Contains fungi and algae growth inhibitors
DOWNLOADS
Ardex WPM 330 (Facade) - 15 Litre Pail SDS
Ardex WPM 330 (Facade) - 15 Litre Pail PDS/TDS
Ardex WPM 330 (Facade) - 15 Litre Pail VOC
Ardex WPM 750
Ardex WPM 750 is made up of synthetic rubber with properties which resist ageing from heat, sunlight and ozone and is heat weldable. Polypropylene filaments are welded onto both sides of the membrane for better wetting by water based adhesives. It has excellent gas impermeability and toughness and remains flexible at low temperatures. Laps and corners are to be heat formed and/or welded. Tiling can be done directly on the membrane after 60 minutes with many Ardex adhesives.
Features/Benefits:
- Resists ageing from heat, sunlight and ozone
- Sides welded with polypropylene filaments for better wetting by water based adhesives
- Excellent gas impermeability and toughness, remaining flexible at low temperatures
- Tiling can be done directly on membrane after 60 minutes
DOWNLOADS
Ardex WPM 750 SDS
Ardex WPM 750 PDS/TDS
Ardex WPM 750 VOC
Ardex WPM 812
ARDEX WPM 812 is a single-component, high viscosity, rollable, liquid polyurethane which cures to form a tough and permanently flexible waterproof membrane.
Benefits/Features:
- One part, ready to use and easily applied
- High-viscosity, non-sag and excellent adhesion to a wide range of subsets
- Labour Saving, with quick access for trades and permanent flexibility
- No tar or bitumen modification and no bleed through
- Non-flamable with low VOC
DOWNLOADS
Ardex WPM 812 SDS
Ardex WPM 812 PDS/TDS
Ardex WPM 812SL
ARDEX WPM 812 SL is a single-component, low viscosity, self-levelling, liquid polyurethane which cures to form a tough and permanently flexible waterproof membrane.
Features/Benefits:
- One part, ready to use, with easy application
- Low-viscosity, self-levelling
- Excellent adhesion to a wide range of substrates
- No bleed through
- Non-flammable and low VOC
DOWNLOADS
Ardex WPM 812SL SDS
Ardex WPM 812SL PDS/TDS
Ardex WPM 823 - 18kg Kit
Ardex WPM 823 is a tough, fast curing, hybrid polyurethane coating designed as a trafficable, impact resistant finish providing a long life protective barrier for both internal and exposed situations. As a top coat, Ardex WPM 823 is UV resistant and provides a durable, non-slip, chemically resistant finish.
Features/Benefits:
- Easy application and fast curing
- UV and chemical resistance, as well as vehicle trafficable
- Immediate resistance to rain damage once cured
- Quick access for trades
DOWNLOADS
Ardex WPM 823 - 18kg Kit SDS
Ardex WPM 823 - 18kg Kit PDS/TDS
Ardex WPM 1000
Ardex WPM 1000 Weldable Waterproofing Membrane is a polypropylene-lined waterproofing sheet membrane specially formulated for the direct adhesion of tiled systems or for other non-exposed use. Ardex WPM 1000 is heat-welded at laps and seams to create a superior bond, consistent gauge and allow a quick installation. Ardex WPM 1000 has excellent flexibility, durability, and superior resistance to tearing, cracking, bubbling and absorption. Flood testing/tiling can be done directly on the membrane after 60 minutes.
Features/Benefits:
- May be directly tiled to (using approved ARDEX tile adhesives).
- Tiling/flood testing can begin 60 minutes after membrane installation
- No fillet/bond breaker required in floor/wall transitions
- Consistent waterproofing gauge thickness
- Heat welded corner and laps
DOWNLOADS
Ardex WPM 1000 SDS
Ardex WPM 1000 PDS/TDS
Ardex WPM 3000X
Ardex WPM 3000X is a "peel and stick" bituminous/asphalt membrane protected by a cross laminated high-density polyethylene film. Ardex WPM 3000X is made from two structural components - Bitumen/asphalt compound modified with SBS and high tack resins. This special compound has been formulated to make the product easy to install. The membrane can be adjusted should it initially be placed in the wrong position, a the adhesive on the sheet achieves final adhesion only after a few minutes.
Features/Benefits:
- Installed without the use of open flames
- The protective polymer film is highly resistant to acids, alkalis and other pollutants
- Easily adapts to irregularly shaped surfaces, and will stretch without breaking or cracking
- Self seals on contact with substrate maintaining its watertightness
DOWNLOADS
Ardex WPM 3000X SDS
Ardex WPM 3000X PDS/TDS
Laticrete Hydro Ban - 15 Litre Pail
Laticrete Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. It is a single component, self-curing, liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates. Hydro Ban has low VOC emissions.
Features/Benefits:
- Bonds directly to copper, steel, stainless steel and PVC for flashing to plumbing fixtures only
- Inhibits strain-causing mould and mildew growth in the substrate
- No solvents, non-flammable, with low VOC emissions and a rapid drying time
- Can be fully immersed, and has tile, brick and stone installed directly onto membrane
DOWNLOADS
Laticrete Hydro Ban - 15 Litre Pail SDS
Laticrete Hydro Ban - 15 Litre Pail PDS/TDS
Mapei Aquaflex WPU - 15 Litre
Aquaflex WPU is a ready-to-use, quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications. It can b e used for concrete, screed, render and masonry surfaces, fibre cement sheeting, wet area rated plasterboard and timber sheeting.
Features/Benefits:
- Highly flexible and elastic
- Solvent free and non-hazardous
- Resistant to algal growth
- Excellent adhesion, as well as UV and weather resistant properties
DOWNLOADS
Mapei Aquaflex WPU - 15 Litre SDS
Mapei Aquaflex WPU - 15 Litre PDS/TDS
Mapei Lamposilex - 5kg
Mapei Lamposilex is a fast-setting and drying hydraulic binder for plugging water leaks. It can be used to plug any sources of water, even under pressure, in a number of situations, including in basements, tunnels and subways, as well as being suitable for sealing watertight rigid joints in hydraulic concrete structures, sewers and tanks. Once mixed with water, Lamposilex forms a paste with plastic consistency that sets in about two minutes.
Features/Benefits:
- Fast-setting - sets in about two minutes after being mixed with water
- Suitable for use in a variety of scenarios, including sewers, subways, and tunnels
- Can be used to plug any source of water, even under pressure
DOWNLOADS
Mapei Lamposilex - 5kg SDS
Mapei Lamposilex - 5kg PDS/TDS
Mapei Mapecoat PU 20 N/A - 17.2kg Bucket
Mapecoat PU 20 N is a two-component, coloured, aliphatic polyurethane topcoat for membranes from the Purtop range, with high level of elasticity and excellent resistance to abrasion. These properties make it suitable for coating membranes from the Purtop range, as well as making it resistant to UV rays and atmospheric agents. It is easy to clean, and resistant to the growth of mould and fungus.
Features/Benefits:
- Suitable for coating membranes from the Purtop range
- Resistant to the growth of mould and fungus
- Highly elastic, with excellent resistance to abrasion, UV rays and atmospheric agents
DOWNLOADS
Mapei Mapecoat PU 20 N/A - 17.2kg Bucket SDS
Mapei Mapecoat PU 20 N/A - 17.2kg Bucket PDS/TDS
Mapei Mapecoat PU 20 N/B - 2.8kg Bucket
Mapecoat PU 20 N is a two-component, coloured, aliphatic polyurethane topcoat for membranes from the Purtop range, with high level of elasticity and excellent resistance to abrasion. These properties make it suitable for coating membranes from the Purtop range, as well as making it resistant to UV rays and atmospheric agents. It is easy to clean, and resistant to the growth of mould and fungus.
Features/Benefits:
- Suitable for coating membranes from the Purtop range
- Resistant to the growth of mould and fungus
- Highly elastic, with excellent resistance to abrasion, UV rays and atmospheric agents
DOWNLOADS
Mapei Mapecoat PU 20 N/B - 2.8kg Bucket SDS
Mapei Mapecoat PU 20 N/B - 2.8kg Bucket PDS/TDS
Mapei Mapelastic Smart Part A - 20kg Bag
Mapelastic Smart is a two-component, high-flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins, and swimming pools. It is used to form highly flexible, waterproof, and protective dressings on concrete structures, even those subject to cracking. It may be applied on cementitious screeds, existing floors (clean and well bonded to the substrate) and renders to waterproof bathrooms, showers. balconies, terraces, and swimming pools before laying ceramic and natural stone.
Features/Benefits:
- Fluid consistency for easy application
- High performance with excellent mechanical characteristics
- Resistant to UV rays
- Low VOC content
DOWNLOADS
Mapei Mapelastic Smart Part A - 20kg Bag SDS
Mapei Mapelastic Smart Part A - 20kg Bag PDS/TDS
Mapei Mapelastic Smart Part B - 10kg Pail
Mapelastic Smart is a two-component, high-flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins, and swimming pools. It is used to form highly flexible, waterproof, and protective dressings on concrete structures, even those subject to cracking. It may be applied on cementitious screeds, existing floors (clean and well bonded to the substrate) and renders to waterproof bathrooms, showers. balconies, terraces, and swimming pools before laying ceramic and natural stone.
Features/Benefits:
- Fluid consistency for easy application
- High performance with excellent mechanical characteristics
- Resistant to UV rays
- Low VOC content
DOWNLOADS
Mapei Mapelastic Smart Part B - 10kg Pail SDS
Mapei Mapelastic Smart Part B - 10kg Pail PDS/TDS
Mapei Mapetex Sel Bandage
Mapei Mapetex Sel Bandage is a non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. The product can be used together with Mapelastic Turbo and Mapelastic Smart, flexible cementitious membranes for waterproofing and protecting concrete surfaces, and concrete units particularly subject to large deformations and, therefore, at risk of cracking.
Features/Benefits:
- Light, easy to handle and easy to cut
- Resistant to atmospheric agents
- Suitable for a wide range of applications, including retaining walls, foundations and hanging gardens
- May be adapted to the profile of all types of substrate
DOWNLOADS
Mapei Mapetex Sel Bandage PDS/TDS
Mapei - Purtop ADY - 1.2L Bucket
Purtop ADY is an admixture that enables Purtop Easy waterproofing membranes to be created by applying only one coat of product. Purtop ADY is an admixture formulated in the Mapei R&D laboratories that enables Purtop Easy to be applied in just one single coat, instead of two coats, without forming bubbles, while also improving the mechanical properties of the membrane.
Features/Benefits:
- Admixture which enables Purtop Easy waterproofing membranes to be created by applying one coat of product
- Improves the mechanical properties of membranes
- Lowers drying times when added to Purtop Easy waterproofing membranes
DOWNLOADS
Mapei - Purtop ADY - 1.2L Bucket SDS
Mapei - Purtop ADY - 1.2L Bucket PDS/TDS
Mapei Purtop Easy Grey - 15kg Bucket
Purtop Easy is a one-complent, elastic, polyurethane membrane with a coloured finish for waterproofing both new and existing balconies, terraces, roofs and areas with pedestrian access. Highly elastic and durable, Purtop Easy is just as easy to apply on horizontal and vertical surfaces. Purtop Easy may be applied in just one single coat by adding Purtop ADY which helps it dry more quickly.
Features/Benefits:
- One-component, ready to use and easy to apply
- Suitable for waterproofing new roofs, terraces, and balconies, with a number of other applications
- Highly elastic and durable
- Can be applied on horizontal and vertical surfaces
DOWNLOADS
Mapei Purtop Easy Grey - 15kg Bucket SDS
Mapei Purtop Easy Grey - 15kg Bucket PDS/TDS
RLA 1 Komponent Waterproofing Membrane - 20kg
RLA 1 Komponent is a one component waterproofing membrane, made on a cementitious base, with fibre reinforcement A specially formulated cementitious based incorporating aggregates and polymers allows the product to withstand large amounts of flexural strain, suitable for 5 bar positive pressure and 1.5 bar negative pressure
Features/Benefits:
- Easily applied
- High adhesion strength, with good crack bridging
- Can be applied on damp surfaces
- Suitable for light foot traffic
DOWNLOADS
RLA 1 Komponent Waterproofing Membrane - 20kg SDS
RLA 1 Komponent Waterproofing Membrane - 20kg PDS/TDS
RLA - PU850 Light Grey UV - 15L
RLA PU850 is a one part, moisture cured, polyurethane primer, designed to suit most waterproofing applications, including on retaining walls, planter boxes, wet areas, and exposed applications. It is designed to cure to a UV stable, seamless waterproofing membrane.
Features/Benefits:
- Excellent adhesion to most substrates
- Excellent thermal and cold resistance
- Highly stable and elastic
- Bitumen free and UV stable
DOWNLOADS
RLA - PU850 Light Grey UV - 15L SDS
RLA - PU850 Light Grey UV - 15L PDS/TDS
RLA WPM Membrane (Grey) - 15L
RLA WPM is a liquid waterproofing membrane designed for use in under-tiled applications. It is designed to accommodate structural movement which can be expected in such circumstances. It is permanently flexible, with a low VOC content, and adhesion to a variety of substrates.
Features/Benefits:
- Permanently flexible, with fibre reinforcement
- Excellent adhesion to a wide variety of substrates
- Safe, easy to use, and quick drying
- Low VOC content
DOWNLOADS
RLA WPM Membrane (Grey) - 15L SDS
RLA WPM Membrane (Grey) - 15L PDS/TDS
RLA WPU Membrane (Grey) - 15L
RLA WPU is a one part, water-based membrane, reinforced by polyurethane/acrylic fibre reinforced water-based membrane. It was developed as a high-performance membrane for most general waterproofing applications, in both internal and external applications. It has low VOC content, and is UV stable for external applications.
Features/Benefits:
- Excellent adhesion to a wide variety of substrates
- Safe, easy to use, and UV stable for external applications
- Can handle light maintenance traffic once fully cured
- Low VOC content
DOWNLOADS
RLA WPU Membrane (Grey) - 15L SDS
RLA WPU Membrane (Grey) - 15L PDS/TDS
Sikalastic 1K - 20kg
Sikalastic 1K is a one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Sikalastic 1K is suitable for use in a number of situations, including the waterproofing and protection of tanks, basins and pipes, as well as the waterproofing of bathrooms, showers, terraces and balconies.
Features/Benefits:
- One component product, requiring only water
- Good sag resistance an easy to apply
- Good crack bridging ability
- Excellent adhesion on many substrates, including concrete, cement mortars, stone and masonry
- Can be applied on damp substrates
DOWNLOADS
Sikalastic 1K - 20kg SDS
Sikalastic 1K - 20kg PDS/TDS
Sikalastic 488 - 15L
Sikalastic-488 is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane.Sikalastic-488 is directly foot-trafficable, and is suitable for a wide range of applications, including balconies, terraces, under-tile beds and plant room floors.
Features/Benefits:
- High resistance to puncture, standing water and UV
- Seamless membrane
- High elongation, with crack bridging capability, and no reinforcement needed
- Single pack, ready to use, creating a quick tack-free surface
- Low VOC
DOWNLOADS
Sikalastic 488 - 15L SDS
Sikalastic 488 - 15L PDS/TDS
Sikalastic 777
Sikalastic 777 is a high performance, hand-applied, low VOC, moisture-curing single component elastomeric polyurethane membrane. It is suitable for a range of waterproofing applications, including planter boxes, retaining walls, and foundation walls. It has excellent root resistant abilities, and is resistant to stagnant water and puncture.
Features/Benefits:
- Excellent resistance to root, stagnant water, puncture and root
- Single component, ready to use
- Quick tack-free surface
- High elongation
- Low VOC
DOWNLOADS
Sikalastic 777 SDS
Sikalastic 777 PDS/TDS
Sikalastic WPU - 15 Litre
SikaTite WPU is a premixed, single component, water based polyurethane waterproofing membrane. It has high extensibility and forms an elastomeric, seamless waterproofing membrane for use in internal and external applications, including under tiled finishes such as shower recesses, bathrooms, laundries and balconies. SikaTite WPU has low VOC emissions and bonds to a wide variety of substrates.
Features/Benefits:
- Suitable for internal and external applications
- Bonds to a wide variety of substrates
- UV Stable with micro fibre enhanced reinforcement
- Water based with low VOC emissions
DOWNLOADS
Sikalastic WPU - 15 Litre SDS
Sikalastic WPU - 15 Litre PDS/TDS
SikaTite 2 Part
Sika SikaTite 2 Part is a flexible, fast-drying, latex modified, cement based, two-part waterproofing membrane. SikaTite 2 Part can withstand up to 1.5 bar of negative head of hydro-static pressure. It is suitable for internal and external waterproofing of shower recesses, bathrooms, balconies, roofs and decks, as well as for areas of continuous water immersion such as swimming pools, spas, water tanks and ponds.
Features/Benefits:
- Fast drying, with excellent adhesion to a variety of substrates
- Suitable for internal and external applications
- Suitable for application over green screeds in internal installations.
- Can be used in covered immersed applications, such as pools, spas and water tanks
- Low VOC content
DOWNLOADS
SikaTite 2 Part SDS
SikaTite 2 Part PDS/TDS
SikaTite BE
SikaTite BE is a heavy duty, highly flexible, water based bitumen waterproofing membrane. SikaTite BE waterproofing and protective coating is suitable for use below ground as a damp proof sandwich membrane, in applications such as foundation, basement and retaining walls. It is fast drying, easy to apply and is suitable for use in immersed applications. It is also suitable for repair of gutter, roofing and existing bitumen surfaces and waterproofing membranes.
Features/Benefits:
- Water based with excellent waterproofing properties
- Fast drying with excellent bonding capabilities
- Can be applied to a wide range of substrates
- One part, and both easily applied and worked with
DOWNLOADS
SikaTite BE SDS
SikaTite BE PDS/TDS
SikaTite PU
SikaTite PU is a fast curing, single component, polyurethane waterproofing membrane for protected applications. It is suitable for application on most building substrates, including concrete, render, screeds and more. It is fast curing, and permanently flexible.
Features/Benefits:
- Suitable for use in protected applications, under screeds, and non-exposes light foot traffic
- Fast curing and permanently flexible
- Excellent adhesion to most substrates, including concrete, render, screeds and wet area wall sheets
DOWNLOADS
SikaTite PU SDS
SikaTite PU PDS/TDS
SikaTite Undertile Grey - 15 Litre
SikaTite Undertile is a highly flexible, fast-drying, Styrene Butadiene Rubber latex modified waterproofing membrane. It has excellent adhesion to most common building substrates and is suitable for internal and external waterproofing applications, such as in shower recesses, bathrooms, and balconies.
Features/Benefits:
- Suitable for internal and external covered applications
- Water based, with low VOC
- One part, with no mixing required making it ready to use
- Excellent adhesion to most common building substrates
DOWNLOADS
SikaTite Undertile Grey - 15 Litre SDS
SikaTite Undertile Grey - 15 Litre PDS/TDS
Sikafloor 158W Fast Barrier - 18kg Kit
Sikafloor 158W Fast Barrier is a rapid-drying, 2-component, very low VOC and moisture water based epoxy resin, designed to chemically cure to form a permanent hydrostatic barrier. It has great penetration into porous construction materials, and is suitable for a single application on most substrate. Sikafloor 158W Fast Barrier is also rapid drying, is highly fluid and easy to apply, and has very low odour during application, making it good to work with.
Features/Benefits:
- Very low VOC and moisture vapour transmission
- Green star certified
- Water-based, highly fluid with very low odour, making it user friendly
- Easy mix ratio
- Resists up to 4 bar negative water pressure
- Suitable for use with underfloor heating
DOWNLOADS
Sikafloor 158W Fast Barrier - 18kg Kit SDS
Sikafloor 158W Fast Barrier - 18kg Kit PDS/TDS
Schonox iFix Set - 7.8kg
Schonox iFIX is a 2 part waterproof adhesive designed for fixing Schonox AB membrane. It is suitable for a wide range of uses, including on balconies and terraces prior to tiling, as well as in highly loaded commercial and residential wet areas, kitchens, and over a range of substrates.
Features/Benefits:
- Suitable for both internal and external use
- Solvent free, with very low emissions
- Highly flexible, crack bridging, with high bond strength and resistance against aging
DOWNLOADS
Schonox iFix Set - 7.8kg PDS/TDS
Bostik Dampfix Platinum WPM - 15L
Bostik Dampfix Platinum is a one-component, water-based waterproofing membrane system formulate for the application on graded substrates. It is suitable for the application over primed porous and non-porous substrates, such as concrete, cement rendered masonry, as well as both internal and external applications.
Features/Benefits:
- Rapid-drying, with excellent adhesion
- Suitable for use as a waterproofing membrane to under-tile internal applications, as well as exposed external applications
- Can be applied to damp substrates
DOWNLOADS
Bostik Dampfix Platinum WPM - 15L SDS
Bostik Dampfix Platinum WPM - 15L PDS/TDS
Bostik Dampfix Undertile WPM - 15L
Bostik Dampfix Undertile WPM is a one-component, water-based polyurethane designed for both internal and external applications. It is easy to apply, requiring no mixing and it has excellent adhesion to a number of substrates, including concrete, rendered masonry, and wet area plasterboard.
Features/Benefits:
- Water-based, suitable for both internal and external application over a number of substrates
- Can be tiled directly with approved Bostik adhesives
- Can be applied with a brush, roller, or trowel
DOWNLOADS
Bostik Dampfix Undertile WPM - 15L SDS
Bostik Dampfix Undertile WPM - 15L PDS/TDS
Bostik Moisture Seal Kit - Part A + B
Bostik Moisture Seal is a 2 part, water-based, damp-proof barrier membrane. It's designed for priming under flooring adhesives and waterproofing membranes, and as an approved moisture/vapour barrier suitable for direct contact with drinking water. It is solvent free, and consequently compatible with a wide range of coverings, including the Bostik Ultraset flooring adhesives.
Features/Benefits:
- Excellent bond to a wide range of substrates, including concrete, fibre cement, and stone
- Accepts a wide range of covering, and can withstand high levels of hydrostatic water pressure
- Can be used with a wide range of coverings
DOWNLOADS
Bostik Moisture Seal Kit - Part A + B SDS
Bostik Moisture Seal Kit - Part A + B PDS/TDS
Mapei Platismul - 20kg
Mapei Platismul is a bitumen waterproofing emulsion for general purpose use. It is a solvent free paste, with its thixotropic consistency making it easy to use for waterproofing even vertical and sloping surfaces. It is resistant to re-emulsifying after prolonged immersion in water, and resistant to aggressive agents present in the soil.
Features/Benefits:
- Can be used for waterproofing flat or curved structures below ground level, as well as horizontal concrete structures
- Solvent free
- Resistant to re-emulsifying after prolonged immersion in wate
DOWNLOADS
Mapei Platismul - 20kg SDS
Mapei Platismul - 20kg PDS/TDS
