Water Based Membranes
Ardex WPM 130 Builder's Express
Ardex WPM 130 Builder's Express is an acrylic PU water-based waterproofing membrane developed for high performance undertile waterproofing.
Features/Benefits:
- Tough, flexible, firm
- Can be tiled over - good adhesion with Ardex tile adhesives
- Excellent adhesion to a wide range of substrates
- Fast drying, 4 hours on decks and some applications
- Meets Green Building Council of Australia Greenstar requirements IEQ-13, IEQ-11
DOWNLOADS
Ardex WPM 130 Builder's Express SDS
Ardex WPM 130 Builder's Express PDS/TDS
Ardex WPM 155 Rapid
Ardex WPM 155 Rapid is a water based, polyurethane-acrylic waterproofing membrane developed for high-performance under-tile waterproofing. It is a fast drying membrane, with excellent film build, making it easy to gauge thickness. It is a Class III membrane, accordance with AS4858 requirements, and meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools.
Features/Benefits:
- Extended coverage for minimising cost
- Fast drying, with excellent adhesion to a wide range of substrates
- Can be tiled over
- Long shelf life
DOWNLOADS
Ardex WPM 155 Rapid SDS
Ardex WPM 155 Rapid PDS/TDS
Ardex WPM 155 Rapid VOC
Ardex WPM 179
ARDEX WPM 179 is a one component liquid applied, latex modified, bituminous elastomeric waterproofing membrane. When cured it forms a permanently flexible waterproof lining to most building surfaces. ARDEX WPM 179 is predominately used as a patching or repair membrane. ARDEX WPM 179 is water based, has almost no odour and is safe to use.
Benefits/Features:
- Easily applied with excellent adhesion to substrates
- High elongation and retains flexibility at low temperatures
- Resists ponding water (once fully cured)
- Water based, with excellent chemical resistance properties
DOWNLOADS
Ardex WPM 179 SDS
Ardex WPM 179 PDS/TDS
Ardex WPM 179 VOC
Ardex WPM 265
Ardex WPM 265 is a red pigmented, acrylic primer system which creates a positive bond between between the substrate and most ARDEX water based membranes. ARDEX WPM 265 can be used in both internal and external applications.
Features/Benefits:
- Suitable for both internal and external applications
- Can be applied on a number of substrates, including timber, as well as new and old concrete
- Suitable for use with a range of Ardex products
DOWNLOADS
Ardex WPM 265 SDS
Ardex WPM 265 PDS/TDS
Ardex WPM 265 VOC
Ardex WPM 300
ARDEX WPM 300 (HydrEpoxy 300) is a two component water based epoxy polyamide membrane/barrier coating. Approved for use with potable (drinking) water.
Features/Benefits:
- Approved for use with potable (drinking) water
- Non-flammable and negligible odour.
- Excellent adhesion to most substrates including brick, masonry, and timber
- Easy clean-up using water.
DOWNLOADS
Ardex WPM 300 SDS
Ardex WPM 300 PDS/TDS
Ardex WPM 300 VOC
Ardex WPM 330 (Facade) - 15 Litre Pail
Ardex WPM 330 is an extremely weather resistant, water-based acrylic waterproofing coating. Specially designed as an exposed facade coating, Ardex WPM 330 prevents moisture, chloride ion, and carbon dioxide entering and damaging the building structure while still allowing the substrate to breathe.
Features/Benefits:
- Water-based, low odour and easy cleaning
- Highly flexible and durable
- Prevents chloride ion, sulfide ion, and carbon dioxide attack
- Contains fungi and algae growth inhibitors
DOWNLOADS
Ardex WPM 330 (Facade) - 15 Litre Pail SDS
Ardex WPM 330 (Facade) - 15 Litre Pail PDS/TDS
Ardex WPM 330 (Facade) - 15 Litre Pail VOC
RLA WPU Membrane (Grey) - 15L
RLA WPU is a one part, water-based membrane, reinforced by polyurethane/acrylic fibre reinforced water-based membrane. It was developed as a high-performance membrane for most general waterproofing applications, in both internal and external applications. It has low VOC content, and is UV stable for external applications.
Features/Benefits:
- Excellent adhesion to a wide variety of substrates
- Safe, easy to use, and UV stable for external applications
- Can handle light maintenance traffic once fully cured
- Low VOC content
DOWNLOADS
RLA WPU Membrane (Grey) - 15L SDS
RLA WPU Membrane (Grey) - 15L PDS/TDS
Sikalastic WPU - 15 Litre
SikaTite WPU is a premixed, single component, water based polyurethane waterproofing membrane. It has high extensibility and forms an elastomeric, seamless waterproofing membrane for use in internal and external applications, including under tiled finishes such as shower recesses, bathrooms, laundries and balconies. SikaTite WPU has low VOC emissions and bonds to a wide variety of substrates.
Features/Benefits:
- Suitable for internal and external applications
- Bonds to a wide variety of substrates
- UV Stable with micro fibre enhanced reinforcement
- Water based with low VOC emissions
DOWNLOADS
Sikalastic WPU - 15 Litre SDS
Sikalastic WPU - 15 Litre PDS/TDS
SikaTite BE
SikaTite BE is a heavy duty, highly flexible, water based bitumen waterproofing membrane. SikaTite BE waterproofing and protective coating is suitable for use below ground as a damp proof sandwich membrane, in applications such as foundation, basement and retaining walls. It is fast drying, easy to apply and is suitable for use in immersed applications. It is also suitable for repair of gutter, roofing and existing bitumen surfaces and waterproofing membranes.
Features/Benefits:
- Water based with excellent waterproofing properties
- Fast drying with excellent bonding capabilities
- Can be applied to a wide range of substrates
- One part, and both easily applied and worked with
DOWNLOADS
SikaTite BE SDS
SikaTite BE PDS/TDS
SikaTite Undertile Grey - 15 Litre
SikaTite Undertile is a highly flexible, fast-drying, Styrene Butadiene Rubber latex modified waterproofing membrane. It has excellent adhesion to most common building substrates and is suitable for internal and external waterproofing applications, such as in shower recesses, bathrooms, and balconies.
Features/Benefits:
- Suitable for internal and external covered applications
- Water based, with low VOC
- One part, with no mixing required making it ready to use
- Excellent adhesion to most common building substrates
DOWNLOADS
SikaTite Undertile Grey - 15 Litre SDS
SikaTite Undertile Grey - 15 Litre PDS/TDS
Bostik Dampfix Platinum WPM - 15L
Bostik Dampfix Platinum is a one-component, water-based waterproofing membrane system formulate for the application on graded substrates. It is suitable for the application over primed porous and non-porous substrates, such as concrete, cement rendered masonry, as well as both internal and external applications.
Features/Benefits:
- Rapid-drying, with excellent adhesion
- Suitable for use as a waterproofing membrane to under-tile internal applications, as well as exposed external applications
- Can be applied to damp substrates
DOWNLOADS
Bostik Dampfix Platinum WPM - 15L SDS
Bostik Dampfix Platinum WPM - 15L PDS/TDS
Bostik Dampfix Undertile WPM - 15L
Bostik Dampfix Undertile WPM is a one-component, water-based polyurethane designed for both internal and external applications. It is easy to apply, requiring no mixing and it has excellent adhesion to a number of substrates, including concrete, rendered masonry, and wet area plasterboard.
Features/Benefits:
- Water-based, suitable for both internal and external application over a number of substrates
- Can be tiled directly with approved Bostik adhesives
- Can be applied with a brush, roller, or trowel
DOWNLOADS
Bostik Dampfix Undertile WPM - 15L SDS
Bostik Dampfix Undertile WPM - 15L PDS/TDS
