Two Part Primers
Mapei - Planiseal MR/B 10lt Bucket
Planiseal MR is an extremely versatile water based epoxy resin compound for use as a primer and protective coating to resist and prevent moisture transmission through mineral substrates. Suitable for applications directly over damp surfaces and freshly installed green concrete, screeds/ cementitious toppings. Planiseal MR exhibits excellent positive and negative hydrostatic pressure resistance. Once cured, subsequent waterproofing membranes, adhesives and other finish coats can be applied.
DOWNLOADS
Mapei - Planiseal MR/B 10lt Bucket SDS
Mapei - Planiseal MR/B 10lt Bucket PDS/TDS
Mapei Mapecoat I 600W /A - 2.3kg Drum
Mapecoat I 600 W is a two-component, transparent, epoxy resin-based primer according to a formula developed in the Mapei R&D Laboratories. Once Mapecoat I 600 W has been prepared as specified diluted according to requirements, it may be applied by roller or by airless spray in coats from 60 to 100 μm thick. Mapecoat to I 600 W may be applied directly on concrete without a vapour barrier.
Features/Benefits:
- Epoxy-based primer
- Can be applied directly on concrete
- When applied before use of Mapecoat I 500w, this product can be used to form self-levelling, vapour-permeable coatings
DOWNLOADS
Mapei Mapecoat I 600W /A - 2.3kg Drum SDS
Mapei Mapecoat I 600W /A - 2.3kg Drum PDS/TDS
Mapei Mapecoat I 600W /B - 3.6kg Drum
Mapefloor I 600 W is a two-component, transparent, epoxy resin-based primer according to a formula developed in the Mapei R&D laboratories. Once Mapecoat I 600 W has been prepared as specified and diluted according to requirements, it may be applied by roller or by airless spray in coats from 60 to 100 μm thick. Mapecoat I 600 W may be applied directly on concrete without a vapour barrier.
Features/Benefits:
- Epoxy-based primer
- Can be applied directly on concrete
- When applied before use of Mapecoat I 500w, this product can be used to form self-levelling, vapour-permeable coatings
DOWNLOADS
Mapei Mapecoat I 600W /B - 3.6kg Drum SDS
Mapei Mapecoat I 600W /B - 3.6kg Drum PDS/TDS
Mapei Planiseal MR/A - 10lt Bucket
Planiseal MR is an extremely versatile water based epoxy resin compound for use as a primer and protective coating to resist and prevent moisture transmission through mineral substrates. Suitable for applications directly over damp surfaces and freshly installed green concrete, screeds/ cementitious toppings. Planiseal MR exhibits excellent positive and negative hydrostatic pressure resistance. Once cured, subsequent waterproofing membranes, adhesives and other finish coats can be applied.
Features/Benefits:
- Extremely versatile
- Suitable for application over damp surfaces, as well as green concrete, screeds and cementitious toppings
- Water-based
DOWNLOADS
Mapei Planiseal MR/A - 10lt Bucket SDS
Mapei Planiseal MR/A - 10lt Bucket PDS/TDS
RLA Gripset E60 Two Part Epoxy Primer - 20L Kit
RLA Gripset E60 Two Part is a water based epoxy, designed for use as both a primer and a protective coating to stop moisture penetration.
More Information
SikaTite Moisture Seal
SikaTite Moisture Seal is designed for the priming of interior concrete substrates and screeds with high moisture levels. The product is ready to use, and easy to apply, with a low consumption rate and rapid cure time.
CHARACTERISTICS AND ADVANTAGES
- Resistant to moisture
- Fast turnaround time of waterproofing and/or flooring works
- Ready to use, easy to apply, with a rapid cure time
- Low consumption rate
- for concrete substrates and screeds with up moisture levels to 93% relative humidity
- EMICODE EC 1PLUS for very low emissions
DOWNLOADS
SikaTite Moisture Seal PDS/TDS
